Contract award notice
Results of the procurement procedure
Section I: Contracting
authority
I.1) Name and addresses
Sharing in Growth UK Ltd
08264809
Moor Lane
Derby
DE24 8BJ
UK
Contact person: Michelle van Toop
Telephone: +44 7977494474
E-mail: michelle@mvtprocurement.com
Fax: +44 7977494474
NUTS: UK
Internet address(es)
Main address: www.sig-uk.org
Address of the buyer profile: http://www.sig-uk.org
I.4) Type of the contracting authority
Other: Sharing in Growth UK Ltd is a company that is financed mainly by a grant from the Regional Growth Fund and its sole purpose is to support the development of gas turbine supply chain manufacturers
I.5) Main activity
Other: sharing in Growth UK Limited is a company that is financed mainly by a grant from the Regional Growth Fund and its sole purpose is to support the development of gas turbine supply chain manufacturers.
Section II: Object
II.1) Scope of the procurement
II.1.1) Title
228/MVT-B Advanced Manufacturing Training Services Framework.
Reference number: 228/MVT-B
II.1.2) Main CPV code
80531100
II.1.3) Type of contract
Services
II.1.4) Short description
A Multi-supplier framework agreement for the specialist Advanced Manufacturing training services required to support the Sharing In Growth programme. The listed manufacturing capabilities (Below) form the basis but not totally inclusive of the areas of the advanced training requirement:
1) Machining;
2) Forging;
3) Casting;
4) Welding;
5) Electronics — PCB;
6) Electronics — Wire Harness;
7) Fabrications;
8) Fiber Optics / Prisms;
9) Wet Processing;
10) Composites;
11) Rubber/Polymer;
12) Plastics;
13) MRO;
14) Raw Material;
15) Other — As of yet not identified until all beneficiaries are engaged on the programme.
II.1.6) Information about lots
This contract is divided into lots:
No
II.1.7) Total value of the procurement
Value excluding VAT:
1 036 800.00
EUR
II.2) Description
II.2.2) Additional CPV code(s)
80531000
80530000
80531200
80532000
II.2.3) Place of performance
NUTS code:
UK
II.2.4) Description of the procurement
The scope of this service is to include:
— A technical review of selected improvement focus area against industry standards and to identify improvement opportunities, with the key deliverables being capability and cost reduction.
— Development of an Advanced Manufacturing training plan with the beneficiary in conjunction with the SiG team to close any skills gaps identified by the Technical review.
— Provision of all training material for on-site coaching and support.
— Provision of any formal training courses identified from the technical review.
— Provide a list of available training courses.
— On site coaching and training of up to 48 days in years 1 and 2 with the beneficiary.
— Provision of all labour to carry out the technical assessment, coaching and training over a period of up to 2 years.
Based on current plans the requirement is for services to be provided to up to 24 Aerospace suppliers across the UK.
II.2.5) Award criteria
Quality criterion: Technical review
/ Weighting: 20
Quality criterion: Improvement plan
/ Weighting: 15
Quality criterion: Capability and cost reduction
/ Weighting: 15
Quality criterion: Resource requirements
/ Weighting: 15
Quality criterion: Programme management
/ Weighting: 5
Price
/ Weighting:
30
II.2.11) Information about options
Options:
No
II.2.13) Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds:
No
Section IV: Procedure
IV.1) Description
IV.1.1) Type of procedure
Open procedure
IV.1.3) Information about a framework agreement or a dynamic purchasing system
The procurement involves the establishment of a framework agreement
IV.1.8) Information about Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement:
Yes
IV.2) Administrative information
IV.2.1) Previous publication concerning this procedure
Notice number in the OJ S:
2016/S 141-255798
Section V: Award of contract
Contract No: 1
Title: 228/MVT-B Advanced Manufacturing Training Services Framework
A contract/lot is awarded:
Yes
V.2 Award of contract
V.2.1) Date of conclusion of the contract
24/10/2016
V.2.2) Information about tenders
Number of tenders received: 2
Number of tenders received from SMEs: 0
Number of tenders received from tenderers from EU Member States: 0
Number of tenders received from tenderers from non-EU Member States: 0
Number of tenders received by electronic means: 2
The contract has been awarded to a group of economic operators:
No
V.2.3) Name and address of the contractor
Advanced Manufacturing Research Centre with Boeing
RC000667
Wallis Way, Catcliffe
Rotherham
S60 5TZ
UK
NUTS: UK
The contractor is an SME:
No
V.2.4) Information on value of the contract/lot (excluding VAT)
Initial estimated total value of the contract/lot:
Total value of the contract/lot:
Lowest offer:
1 016 640.00
GBP
/ Highest offer:
1 036 800.00
GBP
V.2.5) Information about subcontracting
Section V: Award of contract
Contract No: 2
Title: 228/MVT-B Advanced Manufacturing Training Services Framework
A contract/lot is awarded:
Yes
V.2 Award of contract
V.2.1) Date of conclusion of the contract
24/10/2016
V.2.2) Information about tenders
Number of tenders received: 2
Number of tenders received from SMEs: 0
Number of tenders received from tenderers from EU Member States: 0
Number of tenders received from tenderers from non-EU Member States: 0
Number of tenders received by electronic means: 2
The contract has been awarded to a group of economic operators:
No
V.2.3) Name and address of the contractor
MTC Operations Ltd
08707642
Ansty Business Park
Coventry
CV7 9JU
UK
NUTS: UK
The contractor is an SME:
No
V.2.4) Information on value of the contract/lot (excluding VAT)
Initial estimated total value of the contract/lot:
Total value of the contract/lot:
Lowest offer:
1 016 640.00
GBP
/ Highest offer:
1 036 800.00
GBP
V.2.5) Information about subcontracting
Section VI: Complementary information
VI.3) Additional information
Tenders must be submitted to the email address below to arrive no later than 17:00 on Wednesday 10.8.2016.
advancedmanufacturing@sig-uk.org
The services to which the procurement relates fall within the category of Services covered by the Light Tough regime (LTR — Regulations 74 — 77) of the Public Contracts Regulations 2015 ( the Regulations). As such, the stages of the tender process are subject to a ‘light touch regime.’ Although the Authority intends that the tender process will follow a procedure similar to the open procedure in certain respects, for the avoidance of doubt the Authority is not running the process as though the open procedure applies, and so reserves the right to depart from that procedure at any point. The Authority will of course follow the Treaty-based principles of transparency, fairness and non-discrimination in conducting this procurement.
VI.4) Procedures for review
VI.4.1) Review body
Sharing in Growth UK Ltd
Derby
UK
VI.5) Date of dispatch of this notice
16/11/2016