Contract notice
Section I: Contracting
authority
I.1) Name and addresses
National Physical Laboratory
Hampton Road
Teddington
TW11 0LW
UK
E-mail: charley.choules@npl.co.uk
NUTS: UK
Internet address(es)
Main address: www.npl.co.uk
I.3) Communication
The procurement documents are available for unrestricted and full direct access, free of charge at:
https://lupc.bravosolution.co.uk/go/70981783018A043308A4
Additional information can be obtained from the abovementioned address
Tenders or requests to participate must be sent electronically to:
https://lupc.bravosolution.co.uk
Tenders or requests to participate must be sent to the abovementioned address
I.4) Type of the contracting authority
Body governed by public law
I.5) Main activity
Other: Scientific Research
Section II: Object
II.1) Scope of the procurement
II.1.1) Title
https://lupc.bravosolution.co.uk/
II.1.2) Main CPV code
38000000
II.1.3) Type of contract
Supplies
II.1.4) Short description
The National Physical Laboratory [NPL] requirement is for the expansion of battery cycling capabilities that allows optimal utilization of available laboratory space. For this, a modular battery cycler equipped with 96 channels and 4 stackable temperature chambers is required. The purpose is to relieve pressure on existing test infrastructure and increase capacity for commercial research and testing (in addition to NMS work) in batteries.
The setup needs to be able to provide the required number of channels and temperature chambers while fitting in the laboratory space available, must meet the minimum voltage and current resolution, and the temperature chambers must be battery rated (for safety requirements) and operated directly from the same software as the cycler for easier data collection and analysis. There must be an accessory that allows connection and control of a frequency-response analyser to perform wide-frequency EIS experiments without disconnecting the cells from the cycler. Additionally, there must be several models of cell holders/cables that allow measurement of a range of cell formats.
II.1.5) Estimated total value
Value excluding VAT:
300 000.00
GBP
II.1.6) Information about lots
This contract is divided into lots:
No
II.2) Description
II.2.3) Place of performance
NUTS code:
UK
II.2.4) Description of the procurement
The National Physical Laboratory [NPL] requirement is for the expansion of battery cycling capabilities that allows optimal utilization of available laboratory space. For this, a modular battery cycler equipped with 96 channels and 4 stackable temperature chambers is required. The purpose is to relieve pressure on existing test infrastructure and increase capacity for commercial research and testing (in addition to NMS work) in batteries.
The setup needs to be able to provide the required number of channels and temperature chambers while fitting in the laboratory space available, must meet the minimum voltage and current resolution, and the temperature chambers must be battery rated (for safety requirements) and operated directly from the same software as the cycler for easier data collection and analysis. There must be an accessory that allows connection and control of a frequency-response analyser to perform wide-frequency EIS experiments without disconnecting the cells from the cycler. Additionally, there must be several models of cell holders/cables that allow measurement of a range of cell formats.
II.2.5) Award criteria
Price is not the only award criterion and all criteria are stated only in the procurement documents
II.2.7) Duration of the contract, framework agreement or dynamic purchasing system
Duration in months: 12
This contract is subject to renewal: No
II.2.9) Information about the limits on the number of candidates to be invited
II.2.10) Information about variants
Variants will be accepted:
No
II.2.11) Information about options
Options:
No
II.2.13) Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds:
No
Section III: Legal, economic, financial and technical information
III.1) Conditions for participation
III.1.2) Economic and financial standing
Selection criteria as stated in the procurement documents
III.1.3) Technical and professional ability
Selection criteria as stated in the procurement documents
III.2) Conditions related to the contract
Section IV: Procedure
IV.1) Description
IV.1.1) Type of procedure
Open procedure
IV.1.8) Information about Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement:
Yes
IV.2) Administrative information
IV.2.2) Time limit for receipt of tenders or requests to participate
Date:
20/10/2023
Local time: 15:00
IV.2.4) Languages in which tenders or requests to participate may be submitted
EN
IV.2.7) Conditions for opening of tenders
Date:
20/10/2023
Local time: 15:00
Section VI: Complementary information
VI.1) Information about recurrence
This is a recurrent procurement:
No
VI.4) Procedures for review
VI.4.1) Review body
NPL Management Ltd
Teddington
TW11
UK
VI.5) Date of dispatch of this notice
13/09/2023