Contract notice
Section I: Contracting
authority
I.1) Name and addresses
Perth & Kinross Council
2 High Street
Perth
PH1 5PH
UK
Contact person: Nicola Sutherland
Telephone: +44 1738475000
E-mail: NSutherland@pkc.gov.uk
NUTS: UKM77
Internet address(es)
Main address: http://www.pkc.gov.uk/article/15478/Tenders-and-contracts
Address of the buyer profile: https://www.publiccontractsscotland.gov.uk/search/Search_AuthProfile.aspx?ID=AA00372
I.3) Communication
The procurement documents are available for unrestricted and full direct access, free of charge at:
www.publictendersscotland.publiccontractsscotland.gov.uk
Additional information can be obtained from the abovementioned address
Tenders or requests to participate must be sent electronically to:
www.publictendersscotland.publiccontractsscotland.gov.uk
I.4) Type of the contracting authority
Regional or local authority
I.5) Main activity
General public services
Section II: Object
II.1) Scope of the procurement
II.1.1) Title
PKC13738 - Domestic & Commercial Removals and Storage Framework
Reference number: PKC13738
II.1.2) Main CPV code
98392000
II.1.3) Type of contract
Services
II.1.4) Short description
Perth and Kinross Council (The Purchaser) is seeking to appoint suitably qualified and experienced Contractors as suppliers to a framework agreement to provide Domestic and Commercial Contents Removals and Storage as set out in the specification document.
Bidders should note that they do not have to be able to perform all the different types of services to gain a place on the framework. For example, a small business who only has capacity to perform small load moves will not be disadvantaged. The Technical response will provide the bidders with an opportunity to select the types of moves they have capacity and capability to perform. This information will be used by the Purchaser for assessing the Suppliers capability and capacity to perform the services at the Call Off stage.
II.1.5) Estimated total value
Value excluding VAT:
480 000.00
GBP
II.1.6) Information about lots
This contract is divided into lots:
Yes
Tenders may be submitted for all lots
II.2) Description
Lot No: 1
II.2.1) Title
Domestic Properties
II.2.2) Additional CPV code(s)
98392000
44613400
II.2.3) Place of performance
NUTS code:
UKM77
II.2.4) Description of the procurement
Perth and Kinross Council (The Purchaser) is seeking to appoint suitably qualified and experienced Contractors as suppliers to a framework agreement to provide Domestic and Commercial Contents Removals and Storage as set out in the specification document.
Bidders should note that they do not have to be able to perform all the different types of services to gain a place on the framework. For example, a small business who only has capacity to perform small load moves will not be disadvantaged. The Technical response will provide the bidders with an opportunity to select the types of moves they have capacity and capability to perform. This information will be used by the Purchaser for assessing the Suppliers capability and capacity to perform the services at the Call Off stage.
II.2.5) Award criteria
Criteria below:
Quality criterion: Quality
/ Weighting: 30
Price
/ Weighting:
70
II.2.6) Estimated value
Value excluding VAT:
480 000.00
GBP
II.2.7) Duration of the contract, framework agreement or dynamic purchasing system
Duration in months: 48
This contract is subject to renewal: No
II.2.9) Information about the limits on the number of candidates to be invited
II.2.10) Information about variants
Variants will be accepted:
No
II.2.11) Information about options
Options:
No
II.2.13) Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds:
No
II.2.14) Additional information
The budget has been based on historical spending.
This is a maximum value which is intended to ensure that there is sufficient capacity within the framework to accommodate Call Offs for the Purchaser’s requirements and any unforeseen peaks in demand and should not be relied upon as an indication of the likely actual value of work that will be awarded.
Lot No: 2
II.2.1) Title
Commercial Properties
II.2.2) Additional CPV code(s)
98392000
39173000
II.2.3) Place of performance
NUTS code:
UKM77
II.2.4) Description of the procurement
Perth and Kinross Council (The Purchaser) is seeking to appoint suitably qualified and experienced Contractors as suppliers to a framework agreement to provide Domestic and Commercial Contents Removals and Storage as set out in the specification document.
Bidders should note that they do not have to be able to perform all the different types of services to gain a place on the framework. For example, a small business who only has capacity to perform small load moves will not be disadvantaged. The Technical response will provide the bidders with an opportunity to select the types of moves they have capacity and capability to perform. This information will be used by the Purchaser for assessing the Suppliers capability and capacity to perform the services at the Call Off stage.
II.2.5) Award criteria
Criteria below:
Quality criterion: Quality
/ Weighting: 30
Price
/ Weighting:
70
II.2.6) Estimated value
Value excluding VAT:
480 000.00
GBP
II.2.7) Duration of the contract, framework agreement or dynamic purchasing system
Duration in months: 48
This contract is subject to renewal: No
II.2.9) Information about the limits on the number of candidates to be invited
II.2.10) Information about variants
Variants will be accepted:
No
II.2.11) Information about options
Options:
No
II.2.13) Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds:
No
II.2.14) Additional information
This is a maximum value which is intended to ensure that there is sufficient capacity within the framework to accommodate Call Offs for the Purchaser’s requirements and any unforeseen peaks in demand and should not be relied upon as an indication of the likely actual value of work that will be awarded.
The budget has been based on historical spending.
Section III: Legal, economic, financial and technical information
III.1) Conditions for participation
III.1.2) Economic and financial standing
List and brief description of selection criteria:
Requirement
4B.4 The Bidder will be required to state the values for the following for the last two financial years:
1. Current Ratio (Current Assets divided by Current Liabilities)
2. Net Assets (Net Worth) (value per the Balance Sheet)
4B.5.1 The Bidder must confirm they already have, or can commit to obtain, prior to commencement of the contract:
Employer’s Liability Insurance
Public Liability Insurance
Goods-in-Transit
Goods-in-Storage
Minimum level(s) of standards required:
4B.4 Financial Ratios
The acceptable range is:
1. Current Ratio - it is expected that the ratio is equal to or greater than 1, i.e. Current Assets will equal or exceed Current Liabilities for both years. Reasons for not meeting the required test to be disclosed by tenderers together with appropriate supporting evidence to confirm the suitability of the tenderer for the contract.
2. Net Assets (Net Worth) - it is expected that the Net Worth will be positive, i.e. a Net Assets position for both years. Reasons for not meeting the required test to be disclosed together with appropriate supporting evidence to confirm the suitability of the tenderer for the contract.
4B.5 Level of Insurance
Employer’s Liability Insurance in the sum of GBP10,000,000 for any one occurrence or series of occurrences arising out of one event.
Public Liability Insurance in the sum of GBP5,000,000 for any one occurrence or series of occurrences arising out of one event.
Goods-in-Transit = 35,000 GBP
Goods-in-Storage = 1million GBP
III.1.3) Technical and professional ability
List and brief description of selection criteria:
4C.1.2 Bidders will be required to provide two examples of how they have delivered a similar service within the last three years
4C.10 Subcontractors
4D.1 Quality Management Procedures
4D.1 HEALTH AND SAFETY PROCEDURES
4D.2 Environmental Management Standards
Minimum level(s) of standards required:
4C.1.2 Bidders should include the following information for each example:
a description of the goods works or services delivered
contract value & dates
previous or current customer details
4C.10 Bidders will be required to confirm whether they intend to subcontract and, if so, for what proportion of the contract.
4D.1 Quality Management Procedures
1. The bidder must hold a UKAS (or equivalent) accredited independent third-party certificate of compliance in accordance with BS EN ISO 9001 (or equivalent),
OR
2. The bidder must be able to provide documented evidence of their Quality Management policies and procedures as detailed in section 10 of the Instructions for Tenderers document.
4D.1 HEALTH AND SAFETY PROCEDURES
1. The bidder must hold a UKAS (or equivalent), accredited independent third-party certificate of compliance in accordance with BS OHSAS 18001 (or equivalent) or have, within the last 12 months, successfully met the assessment requirements of a construction-related scheme in registered membership of the Safety Schemes in Procurement (SSIP) forum.
OR,
2. The bidder must be able to provide documented evidence of their Health and Safety policies and procedures as detailed in section 10 of the Instructions for Tenderers document.
4D.2 Environmental Management Standards
1 The Bidder must hold a UKAS (or equivalent) accredited independent third-party certificate of compliance with
BS EN ISO 14001 (or equivalent) or a valid EMAS (or equivalent) certificate,
OR
2. The bidder must be able to provide documented evidence of their Environmental Management Standards as detailed in section 10 of the Instructions for Tenderers document.
III.2) Conditions related to the contract
Section IV: Procedure
IV.1) Description
IV.1.1) Type of procedure
Open procedure
IV.1.3) Information about a framework agreement or a dynamic purchasing system
The procurement involves the establishment of a framework agreement with several operators.
Envisaged maximum number of participants to the framework agreement: 8
IV.1.8) Information about Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement:
Yes
IV.2) Administrative information
IV.2.2) Time limit for receipt of tenders or requests to participate
Date:
28/10/2026
Local time: 12:00
IV.2.4) Languages in which tenders or requests to participate may be submitted
EN
IV.2.6) Minimum time frame during which the tenderer must maintain the tender
Duration in months: 3 (from the date stated for receipt of tender)
IV.2.7) Conditions for opening of tenders
Date:
28/10/2026
Local time: 12:00
Section VI: Complementary information
VI.1) Information about recurrence
This is a recurrent procurement:
Yes
Estimated timing for further notices to be published:
New framework will be advertised prior to the end of this framework
VI.2) Information about electronic workflows
Electronic ordering will be used
Electronic invoicing will be accepted
Electronic payment will be used
VI.3) Additional information
The buyer is using PCS-Tender to conduct this ITT exercise. The Project code is 31005. For more information see: http://www.publiccontractsscotland.gov.uk/info/InfoCentre.aspx?ID=2343
Community benefits are included in this requirement. For more information see: https://www.gov.scot/policies/public-sector-procurement/community-benefits-in-procurement/
A summary of the expected community benefits has been provided as follows:
Community benefits are included in this requirement, more information on community benefits can be found in the instructions for tenderers document.
(SC Ref:843709)
VI.4) Procedures for review
VI.4.1) Review body
Perth Sheriff Court
County Building, Tay Street
Perth
PH2 8NL
UK
VI.5) Date of dispatch of this notice
25/09/2026